"Open design of a fixed probe for water quality monitoring in rivers and lakes" is the bachelor project of an EPFL student Nils Bonfils which is done within the Biodesign project and supervised by Robin Scheibler. The goal is to set a fixed measurement station on Sorge river at EPFL. It will collect different water-related and environment-related data and then send them through the internet to a server to be stored there, and then maybe displayed with a web interface. The core of the station is a raspberry pi that will be used to interface with the different components like the temperature probe. The advantages of using raspberry pi in such project is firstly its low power consumption (roughly 2 to 3 W  ). The there are other advantages like easy backup storage and internet connexion through USB (like usb dongle for 3g/4g) and there also is an ease of use with the ssh connexion which provide a direct inteface to acces the raspberry pi, update the code, etc...
These are the parameters that will be mesured by the station.
- Turbidity of water -> Buy a turbidity sensor on ebay - this one looks ok too - how turbidity sensors works - on amazon - another one
- Photo of the water -> arduino camera
- Barometric pressure -> 
- Temperature of the air + water (available at hackuarium) -> waterproof sensor(DS18B20) - same with 3m cable - ada fruit
These are parameters related to the project that will not be measured for simplicity sake, but it could be interresting to have them on an upgrade of the project (bigger station, needs to measure other things).
Battery and power management
- RPi shield that can schedule shutdown and wakeup Witty Pi
- Laboratory of ecohydrology at EPFL has a project for herbicide monitoring in the Chamberonne catchment where meteorological and flow data are available.
- Flood monitor in the Flood Network.